The following step-by-step example illustrates how to learn the “Guide” button from your Satellite Remote.

To learn the Guide button from the Shaw remote to the Favorite #1 button on the weemote® X. The same procedure can be used to learn any other signals on to the Favorite buttons #2-#5.

  1. Press and hold down the “B” button until the light turns on solid green, then release the “B” button
  2. Press and release the “100” button in the program area, the light will change from green to orange
  3. Press and release the Favorite #1″ button. The light will blink orange
  4. When starting the learning process, please make sure to review the information on page 5 of the weemote® X reference guide for helpful tips. Generally, there should be about 2″ of space between the remote’s and they should be pointing at each other straight. If you don’t get the proper response in steps 5-6, you might need to move the remotes closer together.
  5. Press and release the “Guide” button from the Shaw Remote. After about .5 second delay, the weemote® X light should blink orange twice and then go back on solid orange.
  6. Press and release the “Guide” button from the Shaw Remote for the second time. After about .5 second delay, the weemote® X light should blink orange three times and then go back on solid green.
  7. Press and release the “B” button to exit program mode. The weemote® X light should blink three times and then go out.
Categories: Support